Typi non habent claritatem insitam est usus legentis in qui facit eorum claritatem, investigationes demonstraverunt lectores legere me lius quod legunt saepius.
Shuttle Assembly OSM-1200
Shuttle Assembly OSM-1200
Shuttle Assembly OSM-1200
Shuttle Assembly OSM-1200Shuttle Assembly
Parts included in the Shuttle Assembly
| OM-1214 | SHUTTLE THREAD GUIDE/ OSM | |
| OM-1216 | SHUTTLE CATCH PIN GUIDE/ OSM | |
| OM-1218A | SHUTTLE CATCH GUIDE BLOCK ASSY/ OSM.. | |
| OM-1219 | SHUTTLE LATCH W/1222 STUD/ OSM | |
| OM-1219A | SHUTTLE LATCH ASSY. W/1219,22,23,24 & 26/ OSM | |
| OM-1222 | SHUTTLE LATCH STUDS/ OSM..(SCREW FOR #2224) | |
| OM-1223 | SHUTTLE LATCH SPACERS/ OSM..(SCREW FOR #2224 | |
| OM-1226 | BRACKET, SHUTTLE LATCH/ OSM | |
| OM-1231A | SHUTTLE LATCH CAM KEYS/ OSM | |
| OM-1234 | BRACKET, SHUTTLE SHAFT – RIGHT/ OSM | |
| OM-1236 | SHAFT, SHUTTLE CARRIAGE DRIVE W/ 236A PIN/ OSM | |
| OM-1236A | SHAFT W/PIN & GEAR #236A & #237 ASSY/ OSM | |
| OM-1238 | GEAR, SHUTTLE CARRIAGE DRIVE/ OSM | |
| OM-1240 | GEAR, SHUTTLE OPERATING SLIDE/OSM | |
| OM-1241 | SHUTTLE OPERATING SLIDE CONNECTOR/ OSM – OBSOLETE..SEE #2242 | |
| OM-1244 | LINK, SHUTTLE DRIVE/ OSM | |
| OM-1245 | CLEVIS, SHUTTLE UPPER, NEW STYLE/ OSM | |
| OM-125 | NEEDLE GUIDE BUSHINGS/ OSM ..14/PER MACHINE | |
| OM-1266 | SPRING, SHUTTLE RELEASE SCREW/ OSM | |
| OM-1269 | BLOCK SHUTTLE – RIGHT/ OSM..OBSOLETE | |
| OM-1270 | BLOCK SHUTTLE – LEFT/ OSM..OBSOLETE |
Head Assembly OSM-1100
Head Assembly OSM-1100
Head Assembly OSM-1100
Head Assembly OSM-1100Head Assembly
Parts included in the Head Assembly
| OM-100 | MINI MAINTENANCE GAUGES | |
| OM-101 | BAR, PUNCH HOLDER W/MTG HARDWARE/ OSM | |
| OM-102 | BAR, PUNCH GUIDE W/MTG HARDWARE/ OSM | |
| OM-1104 | BAR, NEEDLE GUIDE W/MTG HARDWARE/ OSM | |
| OM-1105A | GUIDE PINS / OSM | |
| OM-1114 | PUNCH SET SCREW/ OSM | |
| OM-112 | PUNCH BAR SPRING/ OSM | |
| OM-113 | CAP, SPRING/ OSM | |
| OM-114A | PUNCH SET SCREW SPRING/ OSM | |
| OM-115 | PUNCH BUSHINGS/ OSM…. | |
| OM-120 | ROUND POINT PUNCHES/ OSM | |
| OM-1201 | SHUTTLE GUIDE BAR/ OSM..W/ MTG. HARDWARE | |
| OM-1204A | SHUTTLE PIN, (OLD)..OBSOLETE | |
| OM-1206 | SHUTTLE NEEDLE – LEFT/ OSM | |
| OM-1207 | SHUTTLE NEEDLE – RIGHT/ OSM | |
| OM-120G | ROUND POINT PUNCHES/OSM.. | |
| OM-121 | PUNCH GUIDE BUSHINGS/ OSM..14 per machine |
Thread Tension Assembly OSM-700
Thread Tension Assembly OSM-700
Thread Tension Assembly OSM-700
Thread Tension Assembly OSM-700Thread Tension Assembly
Parts included in the Thread Tension Assembly
| OM-702 | Set Screw, Tension Bar | |
| OM-703 | ROD, TENSION RELEASE/ OSM | |
| OM-743 | SPRINT | |
| OM-745 | 12402 STUD, RETAINER/ OSM..use 3/16 x 1″ long dowel pin | |
| OM-746 | 12401 SPRING/ OSM | |
| OM-747 | 12400 COLLAR (RETAINER SLEEVE)/ OSM |
Support Teeth Assembly OSM-600
Support Teeth Assembly OSM-600
Support Teeth Assembly OSM-600
Support Teeth Assembly OSM-600Support Teeth Assembly
Parts included in the Support Teeth Assembly
| OM-601 | SUPPORTING TEETH/ OSM..28/SET |
Frame Assembly OSM-500
Frame Assembly OSM-500
Frame Assembly OSM-500
Frame Assembly OSM-500Frame Assembly
Parts included in the Frame Assembly
| OM-516B | FLYWHEEL BUSHING | |
| OM-517 | FIBER GEAR – 25 TEETH/ OSM | |
| OM-521 | GEAR, INTERMEDIATE PINION -..28 TEETH/ OSM | |
| OM-555 | CONTINUOUS DRIVE BELT |
Drive Assembly OSM-400
Drive Assembly OSM-400
Drive Assembly OSM-400
Drive Assembly OSM-400Drive Assembly
Parts included in OSM-400
| OM-404 | CLUTCH RING/ OSM | |
| OM-407 | DOG PLUNGER SPRING/ OSM | |
| OM-408 | CLUTCH RELEASE PLATE/ OSM | |
| OM-409 | PLUNGER, CLUTCH DOG/ OSM | |
| OM-418 | CLUTCH SPRING GUIDE/ OSM | |
| OM-419 | SPRING, BRAKE BRACKET/ OSM | |
| OM-420 | BRAKE SHOE LINING W/RIVETS/ OSM..CUSTOMER TO BEND & DRILL…6 RIVETS. | |
| OM-427 | BRACKET, BRAKE LEVER/ OSM | |
| OM-428 | CAM FOLLOWER/ OSM..(STANDARD) | |
| OM-428 | Cam Follower | |
| OM-430 | CAM, PUNCH, NEEDLE & SHUTTLE/ OSM | |
| OM-435 | CENTER CAM/ OSM | |
| OM-436 | THREAD TENSION CAM/ OSM | |
| OM-437 | ARM, BRAKE LEVER – UPPER/ OSM | |
| OM-438 | ARM, BRAKE LEVER (LOWER) OSM | |
| OM-442 | BRAKE SPRING | |
| OM-443 | ROD BRAKE SPRING | |
| OM-444 | BRAKE ADJUSTING NUT/ OSM..NEW STYLE | |
| OM-445 | DRUM, FRICTION BRAKE/ OSM | |
| OM-449/2449A | CAM, FRICTION BRAKE, R&L/ OSM..SOLD ONLY IN PAIRS | |
| OM-450 | ROLLER, FRICTION BRAKE CAM | |
| OM-451 | PIN BRAKE CAM ROLL |
Book Clamping Assembly OSM-300
Book Clamping Assembly OSM-300
Book Clamping Assembly OSM-300
Book Clamping Assembly OSM-300Book Clamping Assembly
Parts included in OSM-300
| OM-301 | BOOK SHELF HOUSING/ OSM..CASTING | |
| OM-302 | BRACKET, CLAMPING HEAD/ OSM..OBSOLETE | |
| OM-303 | CLAMP HEAD/ OSM | |
| OM-304 | ARM, CLAMP HEAD LOCKING, L & R/ OSM (sold in pairs).. | |
| OM-307 | THREAD CLIP/ OSM | |
| OM-307A | THREAD CLIP SCREWS/ OSM | |
| OM-312 | Drilled Rubber Pad | |
| OM-3120 | Bayonet Point Punches | |
| OM-316 | CAM, BOOK MOVING/ OSM | |
| OM-319 | LEVER, BM CAM OPERATING/ OSM | |
| OM-320 | SCREW, B.M. CAM LEVER – LONG/ OSM | |
| OM-320A | SCREW, BM CAM OPER LEVER,SMALL/ OSM | |
| OM-321 | SHORT LINK, B.M. CAM OPERATING/OSM | |
| OM-322 | LONG LINK, B.M. CAM OPERATING/ OSM | |
| OM-323 | Spring, Book Table Tension | |
| OM-3250 | SHUTTLE CAM LEVER W/SCREW/ OSM | |
| OM-327 | PAWL, OPERATING LEVER/ OSM | |
| OM-327A | Spring, B.M. Cam Lever | |
| OM-329 | HOUSING, BOOK MOVING MECHANISM/ OSM | |
| OM-330A | BM CAM SLIDING BAR ASSY. | |
| OM-331 | SCREW EYE, B.M. ROD | |
| OM-332 | STUD, B.M. CAM ROLLER | |
| OM-332 | LONG LINK B.M. CAM OPERATING | |
| OM-333 | ROLLER, B.M. CAM/ OSM | |
| OM-334A | Collar Book Guide Rod | |
| OM-336 | Spring, Book Moving Rod | |
| OM-338A | Feed Guide Clamp Assembly | |
| OM-339 | FEED GUIDE DROP BAR/ OSM | |
| OM-3406 | CLUTCH PAWL/ OSM | |
| OM-341 | DROP BAR/GIB – LATEST DESIGN | |
| OM-344 | ANGLE PLATE, BM/ OSM | |
| OM-344B | ANGLE PLATE BLANK/ OSM | |
| OM-359 | CENTER CAM FOLLOWER, NS (includes stud and roller/ OSM | |
| OM-361S | BOOK SUPPORT PLATE EXTENSION/OSM..SPECIAL | |
| OM-362 | Book Support, Extension – large | |
| OM-364 | UPPER SHEAR BLADE / OSM..(Located on Pull-out to cut thread) | |
| OM-365 | LOWER SHEAR BLADE/ OSM..(STATIONARY) | |
| OM-368 | BOOK SHELF PLATE/ OSM..(stationary blade) | |
| OM-369 | ||
| OM-370 | CLAMPING HOUSING/ OSM | |
| OM-373 | Leather Pad | |
| OM-373K | NAILS FOR LEATHER PADS | |
| OM-374 | FRICTION CLAMP SCREW/ OSM | |
| OM-375 | Spring, Friction Release | |
| OM-376 | FRICTION PLATE GUIDE (LOWER)/ OSM | |
| OM-379 | Shaft, Clamp Tightening | |
| OM-383 | CONNECTING LINK | |
| OM-386 | LEVER, CENTER CAM/ OSM | |
| OM-387 | Center Cam Lever Bearing |
Manodex
Manodex
Manodex
ManodexThumb indexing utilizing gold-stamped labels mounted into the desired position is more labor intensive but aesthetically much more pleasing. Such machines such as the MEKAINDEX™ are in existence but expensive for short runs. The need for a simple manual thumb index cutter prompted the design of the MANODEX™ based on the design of a rare unit displayed in our museum…an affordable tool that enables you to diversify your product line for increased profitability.
Note: The video shows the more expensive Mekaindex Pneumatic Thumb Index Cutter. The book clamping fixture shown in the video is available as an option for the Manodex.
[su_youtube url="https://www.youtube.com/watch?v=I4pGOBTRwGg"]
TYPESETTING (INTERTYPE)
TYPESETTING (INTERTYPE)
TYPESETTING (INTERTYPE)
TYPESETTING (INTERTYPE)INTERTYPE Model F-4, Machine #30019 w/4 magazines with type. With Quadding and Centering device and miscellaneous loose items.
TYPE CABINETS
TYPE CABINETS
TYPE CABINETS
TYPE CABINETSA 15-drawer oak type cabinet, 22″ wide x 21″ deep x 34″ high with type and a missing drawer.
TYPE CABINETS
TYPE CABINETS
TYPE CABINETS
TYPE CABINETSAn oak type cabinet, 22″ wide x 21″ deep x 25″ high with 10 drawers 7 of which are with type.
STAMPING CHASES
STAMPING CHASES
STAMPING / EMBOSSING (OMCOA)
STAMPING / EMBOSSING (OMCOA)
STAMPING / EMBOSSING (OMCOA)
STAMPING / EMBOSSING (OMCOA)OMCOA, “Dek-O-Letter”. Stamps on the spine of a finished book.
STAMPING/EMBOSSING
STAMPING/EMBOSSING
STAMPING/EMBOSSING
STAMPING/EMBOSSINGCalled: Arming Press, Embossing Press, Stamping Press these machines would create the richly embossed book covers that make the nineteenth century book unique.
Typi non habent claritatem insitam est usus legentis in qui facit eorum claritatem, investigationes demonstraverunt lectores legere me lius quod legunt saepius.
BUILDING-IN (HUNKELER)
BUILDING-IN (HUNKELER)
BUILDING-IN (HUNKELER)
BUILDING-IN (HUNKELER)HUNKELER ADP-45/70, 17″x27″, 2 x 7-12″ daylight.
LETTERING PALLETS
LETTERING PALLETS
LETTERING PALLETS
LETTERING PALLETSAvailable in various sizes, these pallets are a practical necessity for stamping titles in gold. Turning the thumb screws at the ends causes the clamping blocks to move forward or away from each other so that the type is always centered under the handle.
AUTOGLUER™
AUTOGLUER™
AUTOGLUER™
AUTOGLUER™
ROUNDING & BACKING (MEKATRONICS Model GL-10 REMANUFACTURED)
ROUNDING & BACKING (MEKATRONICS Model GL-10 REMANUFACTURED)
ROUNDING & BACKING (MEKATRONICS Model GL-10 REMANUFACTURED)
ROUNDING & BACKING (MEKATRONICS Model GL-10 REMANUFACTURED)ROUNDING & BACKING MEKATRONICS Model GL-10 REMANUFACTURED
STAMPING/EMBOSSING (BURTON)
STAMPING/EMBOSSING (BURTON)
STAMPING/EMBOSSING (BURTON)
STAMPING/EMBOSSING (BURTON)A. G BURTON’S SON, CHICAGO. Called: Arming Press, Embossing Press, Stamping Press these machines would create the richly embossed book covers that make the nineteenth century book unique.
HYDROPRESS™ (TWIN-STATION BUILDING-IN)
HYDROPRESS™ (TWIN-STATION BUILDING-IN)
HYDROPRESS™ (TWIN-STATION BUILDING-IN)
HYDROPRESS™ (TWIN-STATION BUILDING-IN)
TURNING-IN (PADDED COVERS)
TURNING-IN (PADDED COVERS)
TURNING-IN (PADDED COVERS)
TURNING-IN (PADDED COVERS)MEKATRONICS, PADDED COVERS TURNING-IN. A 4-Step turning-in machine.
Frame Assembly OSM-500
Frame Assembly OSM-500
Frame Assembly OSM-500
Frame Assembly OSM-500Frame Assembly
Parts included in the Frame Assembly
| OM-516B | FLYWHEEL BUSHING | |
| OM-517 | FIBER GEAR – 25 TEETH/ OSM | |
| OM-521 | GEAR, INTERMEDIATE PINION -..28 TEETH/ OSM | |
| OM-555 | CONTINUOUS DRIVE BELT |
CENTURION™
CENTURION™
CASING-IN (MEKATRONICS VERSAMATIC)
CASING-IN (MEKATRONICS VERSAMATIC)
CASING-IN (MEKATRONICS VERSAMATIC)
CASING-IN (MEKATRONICS VERSAMATIC)MEKATRONICS VERSAMATIC A single-operator, self-adjusting semi-automatic machine for casing-in different sizes, thickness and types of paper with no make-ready or set-up time handling bulk sizes up to 4-1/8″. Remanufactured.
LITHO STONE
LITHO STONE
LITHO STONE
LITHO STONEThis 9-1/2″ x 13″ x 2″ stone lithograph with its image makes a nice addition to any collector.
LOTEK™ (HARDCOVER CASE MAKING GAUGE)
LOTEK™ (HARDCOVER CASE MAKING GAUGE)
LOTEK™ (HARDCOVER CASE MAKING GAUGE)
LOTEK™ (HARDCOVER CASE MAKING GAUGE)Lotek Video [su_youtube url="http://www.youtube.com/watch?v=0ufHE_xt5r0"]
Manual Case Making Video 1 [su_youtube url="http://www.youtube.com/watch?v=3YTo6BUXFxA"]
Manual Case Making Video 2 [su_youtube url="http://www.youtube.com/watch?v=hOs9TGSG9fE"]
ROUNDING & BACKING (MEKATRONICS Model GL-7R)
ROUNDING & BACKING (MEKATRONICS Model GL-7R)
ROUNDING & BACKING (MEKATRONICS Model GL-7R)
ROUNDING & BACKING (MEKATRONICS Model GL-7R)MEKATRONICS Model GL-7R Serial #0388 (1985)
Typi non habent claritatem insitam est usus legentis in qui facit eorum claritatem, investigationes demonstraverunt lectores legere me lius quod legunt saepius.
Posted by 